Product Description
Multiple deck weighbridges are really a variation of a design, rather than another weigh bridges type. for example, multideck weighbridges may be an above ground, a semi-pit, or a fully inground design. The number and length of the decks very according to your requirements. Decks need not be of the same length.
The advantages of multiple deck weighbridge is that individual axles, or axle groups, are weighed individually and simultaneously. This is ideal for weighbridge that wil be used to record axle breakdown weights as it’s primary function.
Consideration for the corresponding weighbridge type (above ground, Semi-pit and fully inground) still apply. Mid deck restraining assemblies are typically installed between decks to limit deck movement. A purpose-built, intelligent digital weight terminal is provided which can sum the weight of all decks and can display the total weight or individual deck weights.
TECHNICAL SPECIFICATION :
Deck construction | Mild Steel Construction |
Weighbridge width (standard) | 3 m, 3.4 m |
Weighbridge length | 4 m to 5.0 m |
Standard Size | 22m X 3m (3m x 3m) + (6m x 3m) + (7m x 3m) + (6m x 3m) |
24m x 3m (6m x 3m) + (6m x 3m) + (6m x 3m) + (6m x 3m) |
Weighing components | MS / Stainless Steel |
Load cells | PRE-CAL Type (Stainless Steel or Tool Alloys Steel Type) |
Load cell capacity | 30 Mt / 40 Mt Each |
Load cell protection class | IP68, IP69K |
Weighbridge Capacity | 30/50/60/80/100/120/150/160/200t |
Maximum rated axle load | 23.5 t tri axle over 1.2 m axle spacing |
Operating temperature | -60° c to + 50° c (-76° F to 122° F) |
Temperature | -10° c to + 40° c (4° F to 104° F) |
Side rails | : Above ground solutions only |
Easy access to load cells | : Yes |
Unmanned operation | Optional |